ECO-REG regulator


  • 1 - 5 = €196.00
  • 6 - 50 = €182.00
  • 51 - 100 = €170.00
  • 101 - 200 = €161.00
  • 201 and more = €154.00


€196.00 Excl. Tax

The ECO-REG regulator displays the room temperature. It adjusts the room temperature according to the instructions received by radio waves. Cyclically, the ECO-REG regulator transmits its operating statistics to the ECONTROL central station. ECO-REG synchronization is fully automatic with ECO-HOT and ECO-PROX modules.

Addressing ECO-REG regulators with the ECONTROL station is limited to 16 ECO-REG (local). You can extend the number of ECO-REG per site by placing additional ECONTROL stations. It should be noted that the equipment operates on the same radio frequency.

The design is modern and slim. Its highly reduced size and thickness of 17 mm makes it the flattest regulator in the world.


The module has the following characteristics:

  • LCD operating display (T ° , setpoint, ...)
  • Wireless transmission-reception over a range of 30 m
  • 44 time slots configurable by programming
  • Internal supply by ultrasensitive photovoltaic cell
  • The internal battery has a 10-year lifespan
  • 2-year SYREG warranty on hardware
  • Automatic synchronization with 6 ECO-HOT valves and 6 ECO-PROX sensors
  • Sending operating statistics to ECONTROL station

Dimensions Eco-REg

How to know whether my boiler is compatible with the ECO-REG regulator

The ECO-REG regulator is compatible with all boilers. You have to check that your hydraulic system includes a security bypass between the supply and the return of the heating circuit. This is mandatory for installations.

How to change room temperature?

Either by changing the setpoint in ECO-MANAGER (see program) Either on ECO-REG by pressing the "SET" button and then the up or down arrow. Confirm change by pressing "SET" again.

Am I notified if the battery is flat ?

Yes, the LCD display shows "BAT" and the ECO-MANAGER software indicates a heart-shaped icon. The lifespan of the battery is 10 years and SYREG guarantees 5 years.

How to program ECO-REG regulator?

It's simple, you indicate its identifier from 1 to 16 and the ECONTROL address from 1 to 62. You configure each ECO-HOT or ECO-PROX related to ECO-REG by pressing the setup button. ECO-REG successively shows "ra1 .. 6" for ECO-HOT valves and "FE1 .. 6" for ECO-PROX detectors.

Is the ECO-REG regulator visible on the Internet?

Once the ECONTROL station is connected to the modem connected to Internet, it sends SYREG's data center its operating information. Data is sent cyclically.

Go to up