The ECONTROL central station allows Technical Building Management (BMS). This platform is compact and communicates across multiple network types, such as: LAN-CAN-RF.
ECONTROL is connected to the customer's modem and sends SYREG's data center statistical data from the building control.
Each ECONTROL station can control 16 ECO-REG regulators and 62 stations can be connected to the customer's LAN to control more than 992 rooms. The whole is synchronized to the same radio frequency.
The module has the following characteristics:
- Wireless reception transmission to ECO-REG
- Backup lasts 6 hours according to battery size
- Addressing 1 to 62 stations per site
- 4Gb internal storage memory
- Automatic stations synchronization on LAN
- LAN-CAN-RF network communication
How to place the ECONTROL station?
Positioning must be centralized with respect to ECO-REG regulators. You measure the ECO-REG's transmission quality with ECONTROL by placing the controller in "RF test" mode. The ECO-REG regulator sends 200 messages and requests a delivery statuts notification. The transmission error rate is displayed on the controller. You can move the controller in the room to get a better reception.
How to set the ECONTROL station?
Each ECONTROL station includes pre-programmed time slots for the different rooms. Once the customer has configured the settings for each room, remote management and accounting softwares are operational. All operating statistical data of each regulator are sent to the SYREG's data center on the Web.
The ECONTROL stations as well as the ECO-REG regulators are synchronized automatically with each other. The ECO-HOT and ECO-PROX devices synchronize automatically with the ECO-REG module. The number of modules synchronized per radio frequency is 16 * 62 * (6 + 6) = 11,904 ECO-xxx modules.
Is the ECONTROL station visible on the Internet?
Yes, as soon as the ECONTROL station is connected to the modem connected to the Internet, communication with SYREG's data center is automatic. Data is sent continuously.
What is the modem configuration?
The modem is ADSL or other type with a dynamic IP address. This address is sent to SYREG's data center so Web server connects to centralized stations ECONTROL. A fixed IP address is unnecessary.